❓ Help Sungrow Solaris patingin naman ng mga Battery settings ninyo?

[LolitaMass]

Sungrow Solaris patingin naman ng mga Battery settings ninyo?

 

[elveen50]

Eto yung typical na recommended settings para sa Sungrow Solaris inverter + LFP (LiFePO4) battery:

Basic Battery Settings (via iSolarCloud app / local web UI):

Parameter Recommended Value
Battery Type Lithium (LFP)
Charge Priority PV → Battery → Load → Grid
Max Charge Current 0.2C - 0.3C ng battery capacity (e.g., 50A for 200Ah)
Max Discharge Current 0.5C ng battery capacity
Absorption Voltage 56.4V (for 16S LFP, 3.525V/cell)
Float Voltage 54.0V - 54.4V (3.375-3.4V/cell)
Cut-off (Discharge Stop) 44.8V - 46.4V (2.8-2.9V/cell)
Bulk Charging Time 120 min
For LFP (LiFePO4) batteries — important tips:

Kung second-hand / repurposed battery, lower mo yung max charge current para iwas overheating
I-enable ang Temperature Sensor kung available
Kung may BMS communication cable, gamitin mo para automatic settings
Self-Consumption Mode:

Login sa iSolarCloud app → Device Settings
Set Working Mode → "Self-Use" or "Battery Priority"
Backup mode: i-set yung Backup SOC sa 10-20% kung may frequent brownout
Sa Time-of-Use settings, pwedeng i-program kung kailan magcha-charge from grid (kung may cheaper rate sa gabi)
Kung may specific battery brand/model ka (Dyness, Pylontech, Volt, etc.), iba-iba din ang recommended settings. Pa-share mo specs para mas accurate.

 

[LolitaMass]

AVCON 610W x 13 panels
Sungrow MG6RL
300 AH battery

 

[LolitaMass]

JK ESS battery BMS

 

[LolitaMass]

normal ba ung SOH bumagsak agad