S2S New Super Admin

[Nicxs]

Pano mag kunin super admin username at password ng S2S (Surf2Sawa) Modem/Router. (ENABLE LAN and 5G)

MAKE CHANGES AT YOUR OWN RISK!

NOTE: Type all commands with no quotes ("). NIlagyan ko lang quotes para i emphasize yung exact command na gagamitin sa tutorial na to.

Step 1: Installing Telnet Client

open CMD > Run as Administrator
type: "dism /online /Enable-Feature /FeatureName:TelnetClient"

Purpose: Mainstall ang telnet client through CMD.

Tanong: Ano yung telnet client?
Sagot: Command Line/Text Based client na nag allow satin ma manage or ma configure mga routers/modems or switches natin. Normally ginagamit to sa networking (general info nalang sishare ko para di humaba).
Once mainstall si telnet proceed step 2.

Step 2: Locating Gateway Default Ip address
open CMD > type: "ipconfig"
Hanapin yung Default gateway sa lalabas na result, ayun yung magiging Gateway IP nyo.
Another step para makita yung default gateway ay tignan sa likod ng routers/modem nyo.

Step 3: Logging in to Telnet Client
open CMD > type: "telnet 192.168.8.1"
Dito nyo na ilalagay yung Default IP nyo na kinuha natin sa step 2, yung akin is 192.168.8.1 kaya para sa tutorial na to, yung gagamitin natin as example.
Eto yung default telnet username at password ng yotc modems. Tested ko na to sa firmware version B25 at B13.
Username: super
Password: opticalink
Pag ang error connection to host lost meaning mali username at password, ulitin nyo lang kung same version lang modem nyo sa nasabi ko dito sa post. Pag ayaw talaga kahit anong ingat nyo sa pag ttype ng username at password sa telnet, possible na iba modem gamit nyo, iba firmware ng modem nyo, or iba telnet username at password ng modem nyo.

Step 4: Pulling Super Admin Username and Password from modem config File
type: "grep -E 'SUSER_NAME|SUSER_PASSWORD' /config/config.xml"

Sample Result:
B25 Modems
<Value Name="SUSER_NAME" Value="Admin"/>
<Value Name="SUSER_PASSWORD" Value="Converge@yotc123"/>

B13 Modems
<Value Name="SUSER_NAME" Value="Admin"/>
<Value Name="SUSER_PASSWORD" Value="RRRC_@dm1n!YOTC3858"/>

Kung ano lalabas pagtapos nyan, ayan yung admin/password ng Super Admin ng S2S nyo.
Login nyo lang tas enable LAN, 5G at kung ano pang gusto nyong gawin.

Credits kay Deqdmaus
Sakanya ko nabasa tong tutorial na to.

 

[Stephen Klay]

working kaya to sa zte modem?

 

[Nicxs]

working kaya to sa zte modem?

yung zte F670L ba sir?
di po working yan jan

 

[Stephen Klay]

yung zte F670L ba sir?
di po working yan jan

f679w yung akin

 

[Nicxs]

f679w yung akin

nag try kana mag telnet sir?

 

[obsi]

bakit hindi maka type ng password? di lumalabas mga letters pag nagttype na dun sa password

 

[Nicxs]

bakit hindi maka type ng password? di lumalabas mga letters pag nagttype na dun sa password

di talaga lalabas yan sir pero may laman yun pag nag type ka enter mo lang

 

[obsi]

di talaga lalabas yan sir pero may laman yun pag nag type ka enter mo lang

ahh pag inenter ko connection lost e, firmware version ko b22 baka alam nyo po?

 

[Nicxs]

ahh pag inenter ko connection lost e, firmware version ko b22 baka alam nyo po?

same yan ng modem ko sir na isa na nag coconnection lost din
ibig sabihin mali yung username at password nung telnet sa mga modems natin sir

 

[Deqdmaus]

ahh pag inenter ko connection lost e, firmware version ko b22 baka alam nyo po?

anong full name ng b22 at version number?

 

[obsi]

anong full name ng b22 at version number?

Firmware ver. 518_V355R02B22 eto po

 

[nanimator]

Firmware ver. 518_V360R02B15 baka po may nakakaalam ng Superadmin po nito? Patulong nmn po salamat.

 

[Kenz_xD]

Thanks ts, keep it up

 

[Nahida]

Pa bm muna boss, thanks for sharing

 

[cio2384x]

ano kaya login at password ng yotc modem bos ayaw ung super at opticalink

 

[Deqdmaus]

ano kaya login at password ng yotc modem bos ayaw ung super at opticalink

update ko nalng ulit pag may time, possible na wrong pass or newer version yotc nyo