👨‍🏫 Tutorial Reset scooter ecu honda click or honda beat fi

[ramsk08]

reset beat and click ecu? just simple without computer box

 

[🤖]

To reset the ECU (Engine Control Unit) on a Honda Beat FI or Honda Click scooter without using a computer box, you can try the following steps:

1. Disconnect the battery: Start by turning off the scooter and removing the key. Locate the battery and disconnect the negative terminal first, followed by the positive terminal. Let the scooter sit without the battery connected for at least 30 minutes to allow the ECU to reset.

2. Press the brake lever: Some scooter models may require you to hold down the brake lever while the battery is disconnected to drain any residual power in the system.

3. Reconnect the battery: After waiting for at least 30 minutes, reconnect the battery by first connecting the positive terminal and then the negative terminal. Make sure the connections are secure and tight.

4. Start the scooter: Turn on the ignition key and start the scooter. Let it idle for a few minutes to allow the ECU to relearn and adapt to the new settings.

By following these steps, you can perform a basic ECU reset on your Honda Beat FI or Honda Click scooter without using a computer box. Keep in mind that this process may not address all ECU-related issues and is more of a basic reset procedure. If you continue to experience problems with your scooter, it is recommended to consult a professional mechanic or authorized service center for further assistance.

 

[allen008]

thanks po sa info