❓ Help Epson Blinking Lights

[eytong]

Good day mga ma'am/sir. Inquire lang po sana ko regarding sa printer ko (epson 3110 and epson 3210). May mga naka-experience na ba dito yung sabay blinking nung power button( green light), paper at ink indicator(red lights) pero nakakapag print naman sya and hindi lang yung copier at scanner. Nag search na ko at ang sabi sa scanner daw. Na-try ko na alisin at linisin yung cable ng scanner pero hindi nagwork. Nasubukan ko na din i-uninstall yung driver tapos reinstall, same result. Baka po may iba pa kayong idea. Salamat in advance.

 

[🤖]

Hello! It seems like you're experiencing an issue with your Epson 3110 and Epson 3210 printers where the power button, paper, and ink indicator lights are blinking simultaneously, even though you are able to print but not use the copier and scanner functions. Let's try to troubleshoot this issue together.

Since you've already tried cleaning the scanner cable and reinstalling the drivers without success, here are a few more steps you can try:

1. Power Cycle the Printer: Turn off the printer, unplug it from the power source, wait for a few minutes, then plug it back in and turn it on. This can sometimes help reset the printer and clear any temporary issues.

2. Check for Paper Jams: Make sure there are no paper jams or obstructions inside the printer that could be causing the blinking lights. Open all the access doors and check thoroughly.

3. Check Ink Cartridges: Ensure that the ink cartridges are properly installed and are not empty. Sometimes incorrect installation or low ink levels can trigger error lights.

4. Update Firmware: Check if there are any firmware updates available for your printer model on the Epson website. Updating the firmware can sometimes resolve hardware-related issues.

5. Contact Epson Support: If none of the above steps work, it's best to reach out to Epson customer support for further assistance. They may have specific troubleshooting steps for your printer model or recommend service options.

I hope one of these suggestions helps resolve the blinking lights issue on your Epson printers. Let me know if you have any other questions or if you need further assistance. Good luck!

 

[eytong]

Hello! It seems like you're experiencing an issue with your Epson 3110 and Epson 3210 printers where the power button, paper, and ink indicator lights are blinking simultaneously, even though you are able to print but not use the copier and scanner functions. Let's try to troubleshoot this issue together.

Since you've already tried cleaning the scanner cable and reinstalling the drivers without success, here are a few more steps you can try:

1. Power Cycle the Printer: Turn off the printer, unplug it from the power source, wait for a few minutes, then plug it back in and turn it on. This can sometimes help reset the printer and clear any temporary issues.

2. Check for Paper Jams: Make sure there are no paper jams or obstructions inside the printer that could be causing the blinking lights. Open all the access doors and check thoroughly.

3. Check Ink Cartridges: Ensure that the ink cartridges are properly installed and are not empty. Sometimes incorrect installation or low ink levels can trigger error lights.

4. Update Firmware: Check if there are any firmware updates available for your printer model on the Epson website. Updating the firmware can sometimes resolve hardware-related issues.

5. Contact Epson Support: If none of the above steps work, it's best to reach out to Epson customer support for further assistance. They may have specific troubleshooting steps for your printer model or recommend service options.

I hope one of these suggestions helps resolve the blinking lights issue on your Epson printers. Let me know if you have any other questions or if you need further assistance. Good luck!

thank you!

 

[🤖]

thank you!

You're welcome! If you have any more questions or need further assistance in the future, feel free to ask. Good luck with resolving the issue with your Epson printers, and have a great day!

 

[nitro7]

maaring stuck yung gear/track ng scanner - hindi lang 'yung ribbon cable. get some silicone oil/grease and follow the tutorial of Device Doctor on YT.
if you can somehow move the scanner from its current position, baka ma-unstuck at mapagana mo. pero kung kakalikutin mo na rin lang, i-lubricate mo na.

 

[eytong]

maaring stuck yung gear/track ng scanner - hindi lang 'yung ribbon cable. get some silicone oil/grease and follow the tutorial of Device Doctor on YT.
if you can somehow move the scanner from its current position, baka ma-unstuck at mapagana mo. pero kung kakalikutin mo na rin lang, i-lubricate mo na.

sige po subukan ko to.

 

[gforum]

Idol, stock yung gear sa loob ng scanner. Buksan mo yan saka mo galawin or imove mo siya ng bahagya pa taas (slide/move) para yung gear ma libre sa galaw. Try mo na, tandaan mo lang yung kung anong gagalawin mo.

 

[eytong]

Idol, stock yung gear sa loob ng scanner. Buksan mo yan saka mo galawin or imove mo siya ng bahagya pa taas (slide/move) para yung gear ma libre sa galaw. Try mo na, tandaan mo lang yung kung anong gagalawin mo.

na-try ko na lods...ayaw pa din, mukhang palitin na talaga yung scanner.

 

[eytong]

update ko lang...bumili na ko buong unit ng scanner para mapalitan pero ganon pa din...