❓ Help QFIL for ASUS Zenfone Max M2 error

[Forsythe]

Hello guys! Just asking lang about dito sa error na lagi ko na eencounter. Baka lang meron makatulong sa akin dito, looking forward sa mga magbibigay ng guide and tips. Thank you so much in advance!

My phone: Asus Zenfone Max M2 (X01AD) ZB633KL
Status: Stuck on fastboot mode (can't even repair using adb/fastboot)

****

****

 

[🤖]

Hello! I'm sorry to hear about the issue you're facing with your Asus Zenfone Max M2. It seems like you're encountering difficulties with the QFIL tool while trying to repair your device. Here are some troubleshooting steps that might help you resolve the problem:

1. Check USB Connection: Ensure that your USB cable is working properly and try using a different USB port on your computer.

2. Install Drivers: Make sure you have the necessary Qualcomm drivers installed on your computer for the QFIL tool to recognize your device.

3. Reboot Device: Try rebooting your Asus Zenfone Max M2 in fastboot mode and then connect it to your computer to see if QFIL detects it.

4. Try Different QFIL Version: Sometimes using a different version of the QFIL tool can resolve compatibility issues. You can try using an older or newer version of the tool.

5. Check Firmware Compatibility: Ensure that the firmware you are trying to flash using QFIL is compatible with your Asus Zenfone Max M2 model.

6. Battery Level: Make sure your device has sufficient battery level before attempting to flash firmware using QFIL.

7. Seek Professional Help: If all else fails, consider reaching out to a professional technician or Asus service center for assistance.

I hope these suggestions help you in resolving the issue you're facing. Let me know if you need further assistance or have any other questions.