PHNeed na ata nang new setup ni STS NO LOAD para medyo ma bypass ang DPI (DEEP PACKET INSPECTION) ni Smart below is some of the previous setup wayback 2019 and above at ginagamit din ito sa ibang bansa same sa atin to passthrough some network unfortunately I dont have any access to servers and even though I have a little knowledge to setup some of this but still I dont have anyone to hold to sana sa mga current application owner meron silang setup sa ganito feel free to message me here para ma share kodin pano paganahin yong iba nito
. XTLS (Xray) with VLESS + Reality
(Most Advanced & Hard to Detect)
✔ Mimics real website traffic using the "Reality" feature, making it extremely s†éálthy.
✔ No need for Cloudflare or CDN – it works with direct domain routing.
✔ TLS encryption + fingerprint spoofing (makes traffic appear like normal HTTPS from a major website like Google).
✔ DPI-resistant because it does not rely on traditional VPN signatures.
How to set up?
1. Get an Xray (V2Ray) server with XTLS support.
2. Enable Reality (TLS Fingerprinting Bypass).
3. Use a real website as a disguise (e.g., You do not have permission to view the full content of this post. Log in or register now., You do not have permission to view the full content of this post. Log in or register now.).
4. Use VLESS instead of VMess for maximum s†éálth.
Why it works:
Reality mode tricks DPI into thinking it's a real HTTPS request.
No visible tunneling protocols like OpenVPN or SSH.
2. Trojan-GFW (TLS)
✔ Uses TLS encryption to look like a normal HTTPS request.
✔ More lightweight than OpenVPN but still effective against DPI.
✔ Supports CDN (Cloudflare) for extra s†éálth.
How to set up?
1. Rent a Trojan-GFW server.
2. Configure it to use TLS (port 443) and a legitimate website domain.
3. Use a Trojan-compatible VPN client (like Clash or Hiddify).
Why it works:
Smart can’t differentiate it from normal website browsing.
Unlike OpenVPN or SSH, Trojan has no unique handshake that DPI can detect.
3. WireGuard + Cloak
✔ WireGuard is fast, but normally easy to detect.
✔ Cloak masks WireGuard traffic as HTTPS traffic, making it undetectable by DPI.
✔ More lightweight than OpenVPN, SSH, or V2Ray.
How to set up?
1. Install WireGuard on your server.
2. Use Cloak (ck-client & ck-server) to obfuscate traffic.
3. Configure Cloak to mimic a real website like Google or Microsoft.
Why it works:
Smart sees it as regular HTTPS instead of a VPN tunnel.
Faster than OpenVPN and SSH because it has less overhead.
4. Shadowsocks + V2Ray Plugin (Obfuscation)
✔ Shadowsocks alone is sometimes detected, but adding the V2Ray plugin with WebSocket & TLS makes it s†éálthier.
✔ Faster than SSH and OpenVPN.
✔ Works well with CDN (Cloudflare) to hide traffic.
How to set up?
1. Rent a Shadowsocks server.
2. Use the V2Ray plugin with WebSocket (WS) + TLS.
3. Route traffic through Cloudflare to mask your server.
Why it works:
Shadowsocks is a proxy, not a VPN, making it less suspicious.
V2Ray plugin adds an extra encryption layer to confuse DPI systems.
. XTLS (Xray) with VLESS + Reality
(Most Advanced & Hard to Detect)✔ Mimics real website traffic using the "Reality" feature, making it extremely s†éálthy.
✔ No need for Cloudflare or CDN – it works with direct domain routing.
✔ TLS encryption + fingerprint spoofing (makes traffic appear like normal HTTPS from a major website like Google).
✔ DPI-resistant because it does not rely on traditional VPN signatures.
How to set up?
1. Get an Xray (V2Ray) server with XTLS support.
2. Enable Reality (TLS Fingerprinting Bypass).
3. Use a real website as a disguise (e.g., You do not have permission to view the full content of this post. Log in or register now., You do not have permission to view the full content of this post. Log in or register now.).
4. Use VLESS instead of VMess for maximum s†éálth.
Why it works:Reality mode tricks DPI into thinking it's a real HTTPS request.
No visible tunneling protocols like OpenVPN or SSH.
2. Trojan-GFW (TLS)
✔ Uses TLS encryption to look like a normal HTTPS request.
✔ More lightweight than OpenVPN but still effective against DPI.
✔ Supports CDN (Cloudflare) for extra s†éálth.
How to set up?
1. Rent a Trojan-GFW server.
2. Configure it to use TLS (port 443) and a legitimate website domain.
3. Use a Trojan-compatible VPN client (like Clash or Hiddify).
Why it works:Smart can’t differentiate it from normal website browsing.
Unlike OpenVPN or SSH, Trojan has no unique handshake that DPI can detect.
3. WireGuard + Cloak
✔ WireGuard is fast, but normally easy to detect.
✔ Cloak masks WireGuard traffic as HTTPS traffic, making it undetectable by DPI.
✔ More lightweight than OpenVPN, SSH, or V2Ray.
How to set up?
1. Install WireGuard on your server.
2. Use Cloak (ck-client & ck-server) to obfuscate traffic.
3. Configure Cloak to mimic a real website like Google or Microsoft.
Why it works:Smart sees it as regular HTTPS instead of a VPN tunnel.
Faster than OpenVPN and SSH because it has less overhead.
4. Shadowsocks + V2Ray Plugin (Obfuscation)
✔ Shadowsocks alone is sometimes detected, but adding the V2Ray plugin with WebSocket & TLS makes it s†éálthier.
✔ Faster than SSH and OpenVPN.
✔ Works well with CDN (Cloudflare) to hide traffic.
How to set up?
1. Rent a Shadowsocks server.
2. Use the V2Ray plugin with WebSocket (WS) + TLS.
3. Route traffic through Cloudflare to mask your server.
Why it works:Shadowsocks is a proxy, not a VPN, making it less suspicious.
V2Ray plugin adds an extra encryption layer to confuse DPI systems.
