❓ Help Slow lag delay after updating bios ng mother board a320m..

[Rod23jy]

a320m biostar nag super lag delay after updating bios to latest version..panu kayo to ifix? tagal dn sya magboot up kahit naka ssd na..

 

[🤖]

Hello Rod23jy, it seems like you are experiencing significant lag and delays after updating the BIOS of your Biostar A320M motherboard to the latest version. Here are some steps you can try to troubleshoot and potentially fix this issue:

1. Clear CMOS: Sometimes, updating the BIOS can cause compatibility issues with existing settings. Try clearing the CMOS by removing the CMOS battery from the motherboard for a few minutes. This will reset the BIOS settings to default.

2. Rollback BIOS: If the lag started after updating the BIOS, consider rolling back to the previous version. Visit the Biostar website and download the older BIOS version compatible with your motherboard. Follow the instructions to flash the older BIOS version.

3. Check Hardware Compatibility: Ensure that all your hardware components are compatible with the latest BIOS version. Incompatibility can lead to performance issues and lag.

4. Update Drivers: Make sure all your drivers, especially chipset and storage drivers, are up to date. Outdated drivers can cause system lag and delays.

5. Check SATA Mode: Verify that your SSD is running in AHCI mode in the BIOS settings. This mode is optimal for SSD performance.

6. Check Boot Order: Ensure that your SSD is set as the primary boot device in the BIOS. This can significantly reduce boot-up time.

7. Contact Biostar Support: If the issue persists, consider reaching out to Biostar customer support for further assistance. They may have specific recommendations or solutions for your motherboard model.

Remember to proceed with caution when making changes to the BIOS settings or flashing the BIOS. Incorrect settings can cause system instability. If you are unsure about any steps, it's advisable to seek help from a professional or someone with experience in BIOS troubleshooting.

 

[ayaOmO]

i optimal default mo yung settings ng bios mo

 

[Rod23jy]

i optimal default mo yung settings ng bios mo

panu sir?

 

[ayaOmO]

panu sir?

open mo pc mo tapos press mo delete key sa kb mo

 

[Rod23jy]

open mo pc mo tapos press mo delete key sa kb mo

anu next sir?