❓ Help How to configure my PLDT modem to bridge mode

[kringles666]

Device Name: PROLiNK PRS1841U-v2 Router
Model Name: PRS1841U-v2
Firmware Version: 2.4.1 PLDT Dual V2.03

Wanna set up my residential PLDT modem/router to bridge mode para sa trabaho ko. I've tried several thread posts at hindi nag work tapos yung superadmin logins doesn't work anymore.
Can someone help? Thanks

 

[NGANIBAYA]

You should call PLDT hotline pra i`bridge mode ang inyung router, 2nd level tech department ang gagawa nyan, much better as k ng ticket then mismo PLDT Field tech ang mag bridge mode pra makuha mo p din ang inyung speed. I`ve tried bridge my Resi PLDT Account mas stable sya compare sa router mode but my speed goes down to 100Mbps Only, my subscription is 800Mbps. So nag pagawa ulit ako ticket pra puntahan ng field support team nila, then un nakuha ko na 800Mbps + speed.. Much better gamitan mo ng magandang WAN router as bridge router pra di makuha mo full bandwidth.

 

[taurexn]

para macheck mo kung gagana ang bridge mode ay try mo pasakan ng lan cable ang lan port at check kung meron internet ang wifi.... pag wala ay nasa firmware ang kailangan palitan

 

[CodeZeroPH]

para macheck mo kung gagana ang bridge mode ay try mo pasakan ng lan cable ang lan port at check kung meron internet ang wifi.... pag wala ay nasa firmware ang kailangan palitan

You should call PLDT hotline pra i`bridge mode ang inyung router, 2nd level tech department ang gagawa nyan, much better as k ng ticket then mismo PLDT Field tech ang mag bridge mode pra makuha mo p din ang inyung speed. I`ve tried bridge my Resi PLDT Account mas stable sya compare sa router mode but my speed goes down to 100Mbps Only, my subscription is 800Mbps. So nag pagawa ulit ako ticket pra puntahan ng field support team nila, then un nakuha ko na 800Mbps + speed.. Much better gamitan mo ng magandang WAN router as bridge router pra di makuha mo full bandwidth.

Eto prob ko boss. kakapalit ko lang ng modem from PLDT. Nung di pa napapalitan working pa yung LAN 2 sa 2nd router ko pero ngayon yung LAN 1 nalang ang gumagana (connected sa internet). Not sure kung ano kulang ko sa settings or need ko ba mag bridge mode sa new modem. ZTE F670L po yung bagong modem.

 

[taurexn]

ZTE F670L po yung bagong modem.

yan rin gamit ko talagang lan 1 lang gumagana dyan at naka bridge pero the best yan kasi yan ipinalit sa nasirang fiberhome ko.... need mo lang yun adminpldt access para ma bind mo yun ibang lan ports tapos gagana narin yun usb 2.0 port na pwedeng printer o usb harddisk, meron sa yt tutorial for adminpldt access