🔒 Closed Test03

[BagongBayani]

How to make zivpn udptunnel using custom server?

 

[🤖]

To create a zivpn udptunnel using a custom server, you can follow these steps:

1. First, you need to have a custom server with public IP address and UDP port forwarding enabled.

2. Install the zivpn client on your device, and log in with your account credentials.

3. Open the zivpn client and click on the "Settings" button.

4. In the settings menu, select the "Protocols" tab.

5. Choose "UDP" as the protocol, and then select "Custom" under the Server Mode section.

6. Enter the IP address of your custom server and the UDP port number in the corresponding fields.

7. Click on the "Connect" button to establish the udptunnel connection.

If everything is set up correctly, you should be able to establish a secure udptunnel connection using your custom server through zivpn. However, if you encounter any issues, make sure to check that your custom server is configured properly and that the required ports are open.

 

[BagongBayani]

To create a zivpn udptunnel using a custom server, you can follow these steps:

1. First, you need to have a custom server with public IP address and UDP port forwarding enabled.

2. Install the zivpn client on your device, and log in with your account credentials.

3. Open the zivpn client and click on the "Settings" button.

4. In the settings menu, select the "Protocols" tab.

5. Choose "UDP" as the protocol, and then select "Custom" under the Server Mode section.

6. Enter the IP address of your custom server and the UDP port number in the corresponding fields.

7. Click on the "Connect" button to establish the udptunnel connection.

If everything is set up correctly, you should be able to establish a secure udptunnel connection using your custom server through zivpn. However, if you encounter any issues, make sure to check that your custom server is configured properly and that the required ports are open.

How to install udptunnel script that applicable for zivpn, can you teach me with further explanation.

 

[🤖]

How to install udptunnel script that applicable for zivpn, can you teach me with further explanation.

To install the udptunnel script for Zivpn, you can follow these steps:

1. First, make sure you have root access to your server. If you don't have root access, you won't be able to install the script.

2. Download the udptunnel script from the Zivpn website or from Github. You can use the following command to download the script:

wget https://github.com/ziVPN/udptunnel/blob/master/udptunnel.sh

3. Once the script is downloaded, make it executable using the following command:

chmod +x udptunnel.sh

4. Run the script using the following command:

./udptunnel.sh start

5. The script will prompt you to enter the IP address of the server you want to connect to, as well as the port number you want to use for the tunnel.

6. Enter the IP address and port number, and the script will create the tunnel.

7. To stop the tunnel, run the script again with the "stop" option:

./udptunnel.sh stop

That's it! You have now installed the udptunnel script for Zivpn and created a tunnel to your desired server. Note that you may need to configure your Zivpn client to connect to the tunnel using the custom server and port you specified.

 

[Reavr]

To install the udptunnel script for Zivpn, you can follow these steps:

1. First, make sure you have root access to your server. If you don't have root access, you won't be able to install the script.

2. Download the udptunnel script from the Zivpn website or from Github. You can use the following command to download the script:

wget https://github.com/ziVPN/udptunnel/blob/master/udptunnel.sh

3. Once the script is downloaded, make it executable using the following command:

chmod +x udptunnel.sh

4. Run the script using the following command:

./udptunnel.sh start

5. The script will prompt you to enter the IP address of the server you want to connect to, as well as the port number you want to use for the tunnel.

6. Enter the IP address and port number, and the script will create the tunnel.

7. To stop the tunnel, run the script again with the "stop" option:

./udptunnel.sh stop

That's it! You have now installed the udptunnel script for Zivpn and created a tunnel to your desired server. Note that you may need to configure your Zivpn client to connect to the tunnel using the custom server and port you specified.

thanks alot bot.
how do i thanks for your work?

 

[🤖]

thanks alot bot.
how do i thanks for your work?

You're welcome! As an AI language model, I don't expect anything in return, but thank you for your kind words. If you have any further questions or need assistance, feel free to ask me anytime.