🔒 Closed Samsung M10 deadboot

[Pearljackson]

Ayaw po bumukas ng samsung a10. Kapag naman po nakacharge, kapag pinindot ang power button white lang ang nasa screen. Ano kaya problem mga paps?

 

[Junnard15]

amoled display po ba yan?

 

[MarkRob06]

as you said bro
deadboot nga yan if not hardware lcd problem
to fix that is to reinstall the firmware or replace the lcd screen

 

[Pearljackson]

amoled display po ba yan?

Hindi po

as you said bro
deadboot nga yan if not hardware lcd problem
to fix that is to reinstall the firmware or replace the lcd screen

Paano naman po yung pg reinstall ng firmware if ever po?

 

[MarkRob06]

Hindi po


Paano naman po yung pg reinstall ng firmware if ever po?

Installing firmware on a Samsung device using Odin requires careful attention and adherence to the steps. Here's a step-by-step guide on how to install firmware on Samsung using Odin:

Step 1: Download the firmware

Go to the SamMobile website or any other reliable source to download the firmware that matches your Samsung device's model number and country of origin.
Make sure to download the correct firmware, as installing the wrong firmware can cause irreparable damage to your device.

Step 2: Install Odin on your computer

Download and extract the latest version of Odin from the official Samsung website.
Run the Odin executable file as an administrator.

Step 3: Boot your Samsung device into download mode

Turn off your Samsung device.
Press and hold the Volume Down, Home, and Power buttons simultaneously until the device vibrates and shows a warning message.
Press the Volume Up button to enter Download mode.

Step 4: Connect your Samsung device to your computer

Connect your Samsung device to your computer using a USB cable.
Wait until Odin detects your device. If Odin fails to detect your device, install the appropriate USB drivers for your Samsung device.

Step 5: Load the firmware into Odin

Click the "AP" button in Odin and select the firmware file you downloaded earlier.
Wait until Odin checks the firmware file.

Step 6: Start the firmware installation process

Make sure that "Auto Reboot" and "F. Reset Time" options are checked in Odin.
Click the "Start" button in Odin to start the firmware installation process.
Wait until Odin shows a "PASS" message.

Step 7: Reboot your Samsung device

Your Samsung device will automatically reboot after the firmware installation process is complete.
Wait until your device fully boots up.

Congratulations! You have successfully installed firmware on your Samsung device using Odin.

 

[Pearljackson]

Installing firmware on a Samsung device using Odin requires careful attention and adherence to the steps. Here's a step-by-step guide on how to install firmware on Samsung using Odin:

Step 1: Download the firmware

Go to the SamMobile website or any other reliable source to download the firmware that matches your Samsung device's model number and country of origin.
Make sure to download the correct firmware, as installing the wrong firmware can cause irreparable damage to your device.

Step 2: Install Odin on your computer

Download and extract the latest version of Odin from the official Samsung website.
Run the Odin executable file as an administrator.

Step 3: Boot your Samsung device into download mode

Turn off your Samsung device.
Press and hold the Volume Down, Home, and Power buttons simultaneously until the device vibrates and shows a warning message.
Press the Volume Up button to enter Download mode.

Step 4: Connect your Samsung device to your computer

Connect your Samsung device to your computer using a USB cable.
Wait until Odin detects your device. If Odin fails to detect your device, install the appropriate USB drivers for your Samsung device.

Step 5: Load the firmware into Odin

Click the "AP" button in Odin and select the firmware file you downloaded earlier.
Wait until Odin checks the firmware file.

Step 6: Start the firmware installation process

Make sure that "Auto Reboot" and "F. Reset Time" options are checked in Odin.
Click the "Start" button in Odin to start the firmware installation process.
Wait until Odin shows a "PASS" message.

Step 7: Reboot your Samsung device

Your Samsung device will automatically reboot after the firmware installation process is complete.
Wait until your device fully boots up.

Congratulations! You have successfully installed firmware on your Samsung device using Odin.

Salamat po. Balikan ko po to kapag gagawin ko na po.

Wala po lumilitaw aa screen kahit vol **** at power but sinabay po

 

[MarkRob06]

Salamat po. Balikan ko po to kapag gagawin ko na po.

Wala po lumilitaw aa screen kahit vol **** at power but sinabay po

if you're doing it properly then It must be the display that has problems
otherwise it should be able to boot if not on download mode, then at least at recovery mode
or maybe, just maybe the buttons don't work?

 

[Pearljackson]

if you're doing it properly then It must be the display that has problems
otherwise it should be able to boot if not on download mode, then at least at recovery mode
or maybe, just maybe the buttons don't work?

Hello po MarkRob06 just want to show lang po na ganito po yung scenario ng samsung m10. Paano po kaya mailalagay sa dl mode? Para mailagay ang firmware

 

[MarkRob06]

Hello po MarkRob06 just want to show lang po na ganito po yung scenario ng samsung m10. Paano po kaya mailalagay sa dl mode? Para mailagay ang firmware

View attachment 2532551

try looking at this video
You do not have permission to view the full content of this post. Log in or register now.
power button + volume up (recovery mode)
make sure na makikita mo yung recovery mode just like that what is in the video
try this too
power button + volume down (download mode)
if white lang talaga baka hardware na talaga sira
kung may sira sa hardware nya especially yung screen, then I guess that explains why it's stuck on white screen lang
just like what is on this video
You do not have permission to view the full content of this post. Log in or register now.
try to ask your local technician muna kung anong sira nyan para sure tayo if sira lang talaga software nya

 

[Pearljackson]

try looking at this video
You do not have permission to view the full content of this post. Log in or register now.
power button + volume up (recovery mode)
make sure na makikita mo yung recovery mode just like that what is in the video
try this too
power button + volume down (download mode)
if white lang talaga baka hardware na talaga sira
kung may sira sa hardware nya especially yung screen, then I guess that explains why it's stuck on white screen lang
just like what is on this video
You do not have permission to view the full content of this post. Log in or register now.
try to ask your local technician muna kung anong sira nyan para sure tayo if sira lang talaga software nya

Nag blue green po sya. Nadetect po siya ng odin com1 po peri nag eerro po siya PIT po yung nnakalagay sa error

 

[MarkRob06]

Nag blue green po sya. Nadetect po siya ng odin com1 po peri nag eerro po siya PIT po yung nnakalagay sa error

baka mali yung firmware na ginagamit mo?
sangung a10 (not a10s) ba phone mo?

 

[joker09]

na encrypt lang yan, system destroyed. May nagpagawa sakin ng ganyan a few days ago lang and ang ginawa ko ay reprogram lang other than that wala na.

 

[Pearljackson]

na encrypt lang yan, system destroyed. May nagpagawa sakin ng ganyan a few days ago lang and ang ginawa ko ay reprogram lang other than that wala na.

What do you mean sa reprogram po? Flashing firmware po ba?

baka mali yung firmware na ginagamit mo?
sangung a10 (not a10s) ba phone mo?

M10 po pala. M10 po dinl ko SamMobile and tugma naman po sa dinl ko.