🔒 Closed Flashdrive Write Protected

[shazz3113]

Any free software to recommend? Yung flashdrive ko, ayaw ma reformat dahil write protected daw,pero na disable ko na nman sa cmd yung write protection nya,may ma irecommend ba kayo na pwede gamiting software para ma disable sya at pwede na ma reformat yung flashdrive ko?

 

[ChuckY DolL]

try mo reformat sa phone via otg

 

[Aiyu]

Same ganyan din yung flash drive ko, na ayos ko naman through cmd at nai reformat pero the next time na isinaksak ko uli ayon bumalik sa dati HAHA Kaya di ko nagagamit na

 

[shazz3113]

try mo reformat sa phone via otg

sadly sira rin yung phone ko,hahah pero sinubukan ko sya sa chromebook,ayaw pa rin

 

[PHC_LaCe12]

sandisk na plastic yan?

 

[Aiyu]

sandisk na plastic yan?

Sandisk na bakal saakin

 

[PHC_LaCe12]

Sandisk na bakal saakin

sandisk parin ilan gb and lage ka nag transffer??

 

[Aiyu]

sandisk parin ilan gb and lage ka nag transffer??

16gb lang naman, di ko nga magamit kasi need i format tapos di naman maformat

 

[PHC_LaCe12]

16gb lang naman, di ko nga magamit kasi need i format tapos di naman maformat

lage ba transfer ng file?

 

[Aiyu]

lage ba transfer ng file?

Binigay lang kasi saakin to ng Kuya eh kasi di niya daw magamit, di ko alam if nakapag transfer siya ng files noong bago

 

[PHC_LaCe12]

Binigay lang kasi saakin to ng Kuya eh kasi di niya daw magamit, di ko alam if nakapag transfer siya ng files noong bago

ah ok walang remedyo basta write protected lalo sandisk kaya wala akong na kita sandisk na luma puro kingston at transcend na legit

 

[hugo1997]

You can try using the "diskpart" utility in the Command Prompt to remove write protection from your flash drive. Here's how:

1. Connect your flash drive to your computer.
2. Open Command Prompt as administrator by typing "cmd" in the search bar, right-click on Command Prompt and select "Run as administrator".
3. Type "diskpart" in the Command Prompt and press Enter.
4. Type "list disk" in the Command Prompt and press Enter. This will display a list of all the disks connected to your computer.
5. Type "select disk [disk number]" in the Command Prompt, replacing [disk number] with the number of your flash drive.
6. Type "attributes disk clear readonly" in the Command Prompt and press Enter.
7. Type "exit" in the Command Prompt and press Enter.