🔒 Closed A policy is in effect on your computer which prevents printer

[abotchiki123]

Pa help guys nag eerror sya pag nag aadd printer ako sa network printer. windows 10 64 bit naka administrator account naman pero lagi ito yung error message "a policy is in effect on your computer which prevents printer". pa help po thanks

 

[ChuckY DolL]

Method 1​

1. Configure the Load and unload device drivers policy setting for the Power Users group. To do this, follow these steps:
   1. Click Start, point to Programs, point to Administrative Tools, and then click Active Directory Users and Computers.
   2. In the navigation pane, right-click your domain name, and then click Properties.
   3. Click the Group Policy tab, click the GPO that you want to modify, and then click Edit.
   4. In Group Policy Object Editor, locate and then click the Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment folder.
   5. Locate and then double-click Load and unload device drivers.
   6. Click to select the Define these policy settings check box, and then click Add User or Group to add the Power Users domain group.
   7. In the Add User or Group dialog box, click Browse to locate the Power Users domain group. Under Enter the object names to select, type Power Users, and then click Check Names to resolve the group name. Click OK three times.
2. Turn off the Disallow installation of printers using kernel-mode drivers policy. To do this, follow these steps:
   1. In the left pane, locate and then click the Computer Configuration\Administrative Templates\Printers folder.
   2. Locate and then double-click Disallow installation of printers using kernel-mode drivers, click Disabled, and then click OK.
3. Disable the Point and Print Restrictions policy. To do this, follow these steps:
   1. In the left pane, locate and then click the User Configuration\Administrative Templates\Control Panel\Printers folder.
   2. Locate and then double-click Point and Print Restrictions, click Disabled, and then click OK.
4. On the File menu, click Exit.
5. Click Start > Run, type cmd.exe, and then click OK.
6. At the command prompt, type gpupdate /force, and then press ENTER.
7. Repeat steps 5 through 6 on the Windows XP SP1-based and Windows Server 2003-based client computers of the domain.

Method 2​

1. On the Windows Server 2003-based print server, click Start > Run, type Cmd, and then click OK.
2. At the command prompt, type C:\, and then press ENTER.
3. Type Cd\, and then press ENTER.
4. Type Ipconfig /all, and then press ENTER.
5. Write down the IP address of the print server computer.
   Note
   The output for the Ipconfig /all command may resemble the following:
   Windows IP Configuration
   Host Name . . . . . . . . . . . . : MachineName
   Primary Dns Suffix . . . . . . . : DomainName.com
   DNS Suffix Search List. . . . . . : DomainName.com
   Ethernet adapter LAN:
   IP Address. . . . . . . . . . . . : 169.0.0.10
   Subnet Mask . . . . . . . . . . . : 255.255.252.0
   DNS Servers . . . . . . . . . . . : 169.0.0.1 169.0.0.2 169.0.0.3
6. On the Windows XP-based client computer, click Start > Run, type Cmd, and then click OK.
7. At the command prompt, type C:\, and then press ENTER.
8. Type Cd\, and then press ENTER.
9. Type Nslookup PrintServer_IP, and then press ENTER.
   Note
   PrintServer_IP is the IP address that you wrote down in step 5.
10. Make sure that the output of the NsLookup command contains the correct fully qualified domain name (FQDN) of the print server. If it is incorrect, you must contact the network administrator to resolve the DNS issue.

 

[v2clone]

Naka Active Directory ba kayo?

 

[abotchiki123]

Naka Active Directory ba kayo?

pano po icheck ?