PH========================================================================
FOR PASSCODE BYPASS, WITH NETWORK, SYNC ICLOUD, NOTIFICATION FIX
========================================================================
1. (CHECK DRIVER BEFORE START)
GO TO DEVICE MANAGER AND GO TO THE UNIVERSAL SERIAL BUS CONTROLLERS SECTION!
APPLE MOBILE DEVICE USB DEVICE BAD DRIVER
APPLE MOBILE DEVICE USB DRIVER DRIVER GOOD CONDITION
HOW TO FIX?
RIGHT CLICK UNINSTALL THE DEVICE (SELECT THE OPTION TO UNINSTALL THE DEVICE DRIVER)
1- OPEN BUTOOLS
2- GO TO TOOLBOX
3- ITUNES UTILITY
4- REPAIR DRIVER
5- ADVANCED REPAIR
6- AND CLICK UNINSTALL NOW AND READY!
2. IPWNDU: Make iPwnix iso/iRAIN/MAC With USB Driver Using Balena Etcher For iPWNDFU/Exploit Checkm8
3. Back To Your Windows, If Status Tool Show 'CHECKM8' Your Device Ready For Process
4. If Status Tool Not Showing Status 'CHEKCM8' Please Try Again PWNDFU Your Device
5. If Your Device Not Detected, Pleae Click Read Device, Then You Wil Get Messages
6. Click "Boot 1/Boot 2" Wait Tool Process Your Device Till Finished
7. Click "Check SSH", if SSH success, then click "Backup Device"
if SSH Failed, go re enter DFU and make it ipwndfu again then click "Boot Ramdisk 2", if SSH success, then click "Backup Device"
7. After Backup ALL DONE, You Can Restore Your Device To Last Version With 3utools/iTunes, or another way u can erase from Purple Mode (in Change SN Menu). Please no update ios 16.
8. After Restore Complete, IPWNDU Again Your Device Using Your iPwn1x USB Drive. and repeat Load Ramdisk Boot Process
9. Now You Can Click "Check SSH" Button then "Restore Activation Files' Wait Till Process Finishes
10. If SSH Failed, go re enter DFU and make it ipwndfu again then click "Boot Ramdisk 2", if SSH success, then click "Restore Device"
===================================================================================
FOR HELLO IOS 15 BYPAS, NO NETWORK, WIFI ONLY, BROKEN BASEBAND, SYNC ICLOUD
===================================================================================
1. Change sn to F18MWSF6FFDQ, you can use any purple tool. here is magiccfg no need dcsd cable (ip 7- x) download You do not have permission to view the full content of this post. Log in or register now..
iBoy Purple also build in "Change SN"
For iBoy purple u dont need DCSD (Only A10 - A11). and installed Diags CDC Driver
Diags CDC Driver can install with disable driver signature mode, and from add legacy hardware.
2. Connect phone normal mode, read device, click generate activation, after succes generate go next step
3. PWNED device using your favorite bootable,
4. Start Boot Ramdisk. (Read DFU -> BOOT 1/BOOT 2)
5. Click Connect SSH, if Successfull you can do next step.
6. click Activated Hello, done
All Step By Step Done Sucessfully (Thank for Using Our Tools), you can setup your device now.
FOR PASSCODE BYPASS, WITH NETWORK, SYNC ICLOUD, NOTIFICATION FIX
========================================================================
1. (CHECK DRIVER BEFORE START)
GO TO DEVICE MANAGER AND GO TO THE UNIVERSAL SERIAL BUS CONTROLLERS SECTION!
APPLE MOBILE DEVICE USB DEVICE BAD DRIVER
APPLE MOBILE DEVICE USB DRIVER DRIVER GOOD CONDITION
HOW TO FIX?
RIGHT CLICK UNINSTALL THE DEVICE (SELECT THE OPTION TO UNINSTALL THE DEVICE DRIVER)
1- OPEN BUTOOLS
2- GO TO TOOLBOX
3- ITUNES UTILITY
4- REPAIR DRIVER
5- ADVANCED REPAIR
6- AND CLICK UNINSTALL NOW AND READY!
2. IPWNDU: Make iPwnix iso/iRAIN/MAC With USB Driver Using Balena Etcher For iPWNDFU/Exploit Checkm8
3. Back To Your Windows, If Status Tool Show 'CHECKM8' Your Device Ready For Process
4. If Status Tool Not Showing Status 'CHEKCM8' Please Try Again PWNDFU Your Device
5. If Your Device Not Detected, Pleae Click Read Device, Then You Wil Get Messages
6. Click "Boot 1/Boot 2" Wait Tool Process Your Device Till Finished
7. Click "Check SSH", if SSH success, then click "Backup Device"
if SSH Failed, go re enter DFU and make it ipwndfu again then click "Boot Ramdisk 2", if SSH success, then click "Backup Device"
7. After Backup ALL DONE, You Can Restore Your Device To Last Version With 3utools/iTunes, or another way u can erase from Purple Mode (in Change SN Menu). Please no update ios 16.
8. After Restore Complete, IPWNDU Again Your Device Using Your iPwn1x USB Drive. and repeat Load Ramdisk Boot Process
9. Now You Can Click "Check SSH" Button then "Restore Activation Files' Wait Till Process Finishes
10. If SSH Failed, go re enter DFU and make it ipwndfu again then click "Boot Ramdisk 2", if SSH success, then click "Restore Device"
===================================================================================
FOR HELLO IOS 15 BYPAS, NO NETWORK, WIFI ONLY, BROKEN BASEBAND, SYNC ICLOUD
===================================================================================
1. Change sn to F18MWSF6FFDQ, you can use any purple tool. here is magiccfg no need dcsd cable (ip 7- x) download You do not have permission to view the full content of this post. Log in or register now..
iBoy Purple also build in "Change SN"
For iBoy purple u dont need DCSD (Only A10 - A11). and installed Diags CDC Driver
Diags CDC Driver can install with disable driver signature mode, and from add legacy hardware.
2. Connect phone normal mode, read device, click generate activation, after succes generate go next step
3. PWNED device using your favorite bootable,
4. Start Boot Ramdisk. (Read DFU -> BOOT 1/BOOT 2)
5. Click Connect SSH, if Successfull you can do next step.
6. click Activated Hello, done
All Step By Step Done Sucessfully (Thank for Using Our Tools), you can setup your device now.
Spoiler contents are visible only to Established Members.