🔒 Closed Battery Not Charging

[R1SING]

guys need help yung charge ko sna pag kakita ko sa laptop battery icon ito ang nang yari

plugged in siya pero not charging Help plsss

 

[Jeanh]

sira na yung battery ng laptop mo..pag kase ginagamit mo ng naka plug removed the battery first

 

[Lawliet_1]

Try this battery calibration
1. Remove Battery & Unplugged Charger
2. Hold Power Button for 60 secs
3. Insert Battery
4. Plugin Charger
5. Turn On Laptop

 

[R1SING]

sira na yung battery ng laptop mo..pag kase ginagamit mo ng naka plug removed the battery first

ano dapat gawin ko boss???

Try this battery calibration
1. Remove Battery & Unplugged Charger
2. Hold Power Button for 60 secs
3. Insert Battery
4. Plugin Charger
5. Turn On Laptop

Boss Not Working

 

[Jeanh]

buy new battery..ganyan din nangyari sa lappy ko

 

[Jeanh]

Part1
Troubleshooting

1. You do not have permission to view the full content of this post. Log in or register now.
   1
   Unplug for a few minutes, then try a different outlet. Unplug the laptop, wait a few minutes, then plug it into an outlet in a different room. Some users report that a laptop power adapter can temporarily stop working to protect itself from a perceived issue with the power supply.You do not have permission to view the full content of this post. Log in or register now.
   • If your battery is removable, take it out while the power source is disconnected. Hold down the laptop's power button for two minutes, put the battery back in, and plug it in to a new outlet.

You do not have permission to view the full content of this post. Log in or register now.
1
Check your power settings. Go to Start → Control Panel → Power Options. There may be a "low battery level" setting at too high a level, which can cause your computer to shut down instead of charge.You do not have permission to view the full content of this post. Log in or register now. The simplest way to deal with these settings is to restore them to the default. If this does not fix the problem, continue on below

• You do not have permission to view the full content of this post. Log in or register now.
  2
  Open the Device Manager. First, open "Device Manager". This can be found most easily with a Windows computer by using the search function, or by navigating toStart → Control Panel → System and Security → Device Manager.You do not have permission to view the full content of this post. Log in or register now.

• You do not have permission to view the full content of this post. Log in or register now.
  3
  Look at the Batteries settings. When the list has loaded, expand the "Batteries Tab".

• You do not have permission to view the full content of this post. Log in or register now.
  4
  Update driver software. Right click "Microsoft ACPI-Compliant Control Method Battery," then select "Update Driver Software."You do not have permission to view the full content of this post. Log in or register now. Follow the instructions that appear.

• You do not have permission to view the full content of this post. Log in or register now.
  5
  Restart the computer. Shut down the computer and start it up again, so the driver will take effect. If the laptop still won't charge, repeat the "Update driver" step on every entry in the Battery section, then restart your computer a second time.

• You do not have permission to view the full content of this post. Log in or register now.
  6
  Uninstall and reinstall the driver. If you still cannot charge your laptop, try right-clicking "Microsoft ACPI-Compliant Control Method Battery" and selecting "Uninstall." When the process is finished, click the button on the toolbar that says 'Scan for hardware changes" Alternately, you can open the "Action" tab and press Scan for hardware changes. Restart your computer once the driver is reinstalled.
  • This step requires an internet connection on your laptop.

You do not have permission to view the full content of this post. Log in or register now.
1
Check your energy settings (Apple laptops). Open Systems Preferences from the Dock or your Applications folder. Click on Energy Saver and check both the "Battery" and "Power Adapter" setting tabs. In rare cases, a sleep setting set too low can look like a battery charging issue.You do not have permission to view the full content of this post. Log in or register now. In most cases, you'll need to try the additional steps below.

• 
  
  2
  Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light:You do not have permission to view the full content of this post. Log in or register now.
  • Laptops with a non-removable battery: Shut down the computer. Plug it into a power source. On the built-in keyboard, press the left-side shift controloption keys and the laptop power button at the same time. Release the keys at the same time, then turn on your computer.
  • Laptops with a removable battery: Shut down the computer and disconnect the power cord. Remove the battery. Press and hold the power button for five seconds. Reattach the battery and power cord attached to an outlet, then start up the computer.

 

[Jeanh]

You should discharge you battery to 0 every 30 discharges or if that just too hard to remember, very 30 days. The reason you should do this is that battery charging is controlled by a specific scheme which has higher voltages applied at the start an tapers off as it gets to 100%. Over time as battery capacity changes, the battery charging scheme goes further and further "off target". If it thinks your battery is 85% charged when it is really nearing 100%, then you will be overcharging the battery reducing its useful life.

So.... do a full 10% drain every 30 charge cycles..... I use BatteryCare to keep me posted on where I am.

You do not have permission to view the full content of this post. Log in or register now.

The other thing is keep track of temps while gaming .... if doing long sessions while plugged in, prolonged heat exposure can damage battery. So in such conditions, sometimes advisable to remove battery.

If you have not been doing this maintenance, then 2 years is not unusual.

 

[badtreepme]

try mo din po check ung output voltage ng charger using a voltmeter/tester, possible po kasi na bumaba na ung output voltage nun charger kaya detected sya as plug-in pero not charging kc di na tama ung output nya, usually 18.5V po ang output voltage ng mga charger, but to be sure look mo po ung specifications/rating ng charger... mkikita po yun sa mismong charger kung ano yun output nya then compare mo n lng sa measured voltage sa tester... if ala nmn drop sa output voltage most likely may tama na po ung battery. sana mkatulong po ito.

 

[shapala]

boss sinet ko up to 80% ang battery charging ko effective po ba to and hindi kona inaalis ang battery para hindi uminit ang laptop?

 

[scorpionking]

boss tanong ko rin po sa laptop ko ayaw magbukas, sira n po battery nya kaso pag e plug in ko
na yong charger kahit wla na nka insert n battery sa laptop ko
ayaw nya parin magbukas..please pa help din po ako..