๐Ÿ”’ Closed Transformer

Status
Not open for further replies.
Kung itetest ko po yung output voltage nya san kopo ilalagay sa AC or sa DC? Salamat po.
Sa pagamit ng Multitester: take your digital multimeter and set it in the DC mode and connect both the terminals of the multimeter with the output wire.. If your output is DC then it will show you some output whether positive or negative.

But if your output is Ac then you will not get any output in the multimeter. So next step is to switch your multimeter in the AC mode. (this step is required only if there is no output in DC mode of multimeter). Now connect your multimeter with the output and surely you will get an output in the display if your output is AC.
 
Sa pagamit ng Multitester: take your digital multimeter and set it in the DC mode and connect both the terminals of the multimeter with the output wire.. If your output is DC then it will show you some output whether positive or negative.

But if your output is Ac then you will not get any output in the multimeter. So next step is to switch your multimeter in the AC mode. (this step is required only if there is no output in DC mode of multimeter). Now connect your multimeter with the output and surely you will get an output in the display if your output is AC.
Thanks. ๐Ÿ˜Š Student palang kasi ako analog multitester palang meron ako ganun din naman po procedure diba?
 
yung dalawang red malamang ang primary nyan..yung madaming wire ang secondary. Iba iba ang voltage nyan kaya marami. kung wala ka pa rectifier sa secondary ilagay mo sa ac voltage yung multitester mo kung gusto mo malaman ang output nyan.

mag ingat sa AC voltage na galing sa outlet.
 
Status
Not open for further replies.

About this Thread

  • 11
    Replies
  • 1K
    Views
  • 6
    Participants
Last reply from:
darknebula

Trending Topics

Online now

Members online
1,329
Guests online
2,856
Total visitors
4,185

Forum statistics

Threads
2,299,607
Posts
29,131,150
Members
1,201,055
Latest member
Chebuza
Back
Top