PHMostly talaga sa mga magpagustong fresh install of Windows 10 para sa mga low-end laptop or PCs.. pero may major issue tayo.. Reformat..
How about our personal files?
No need to move, just stay what they arranged at location... Makikita mo naman yung instructions ko, how to be know?
Kung may tanong itong idea ko?, just comment..
Features:
Requirements:
1. One of the requirements need to be ready or again for my instruction based.
1. Download Windows 10 ISO file galing kay Microsoft(Untouched), Ghostspectre(Lite/Superlite)
2. The flash drive must be backup all files at
2.1. Backup your Windows 10 Product Key(Dapat Geniune yang OS, hindi KMS) using cmd in adminstrator mode, run for this:
Then kunin mo yung product key, noted to your paper, phones, or capture on screenshot para sa further instructions.
2.2. Backup your all drivers using SmartDriverBackup or any similar programs.. we meet for further instructions.
3. Run Rufus at Run as Administrator, and see how to burn your copied iso to flash drive.
3.1 The Making Bootable disk must addressed at minimum 8gb flash drive.
3.2 Locate “ISO Image” instead of list of “FreeDOS” to your copied iso and load.
3.3 Target to your system for if MBR or GPT, how to be know?
Run cmd:
Paglumabas ng GPT marked to your installed OS sa disk na yan, means pipilin ninyo GPT, pag hindi pa lumabas ng GPT marked, means MBR yung section ninyo. Apply ninyo yung setting niyan para sa Partition Scheme.
3.4. Target System section naman.. Ito ay dalawa lang yan.. BIOS or EFI.. BIOS = can Detect MBR or GPT bootable disk, UEFI = can detect to EFI on GPT only.
3.5. Make sure NTFS siya, automatic siya maging NTFS so skip this step.
3.6. Click Ready.. Click yes.. (Hindi ko po kasalanan, for not recorded of backup files)
4. Waiting for serve for around 15-30 mins, Depende sa disk speed..
5. After making a bootable disk, reboot your PC into BIOS mode.
6. Alam niyo naman, kung paano magboot ng bootable disk sa BIOS. Secure boot off ganon..
7. Strike any key, if need for any key to proceed. Until Windows 10 logo appeared, paglumabas ng installation proceed to step..
8. Click install now and accept the license agreement..Theres something version if need with Windows Defender or not, so choose your plan click to next.. Choose custom install..
9. Theres any disk showed of your screen.. Maybe 1,2,3 or 4. One of the installed windows must be selected but “Don’t reformat it”.
10. Press Next, if pop up Warning selection, press Yes.. If “Next” is grayed out means iba yung partition scheme mo.. Balik ka rufus from boot to Windows 10.
11. During installation, is copied to your disk, wait for couple of minutes to finish those needcto acquire lists.
12. If installation is complete then count from 10 seconds, strike Restart now.. You can remove the Flash Drive.
13. During restart process.. And start Windows 10 in 2/3 hours, depends on performance..
14. As a appeared any instructions on screen, you can input yourself.. So its up to you.. Until we meet on Desktop.
15. On Desktop... You run user as Administrator Mode.. You can change user by making Add User on Control Panel and choose Computer Administrator, need natin para sa UAC.
16. How about our files?, Dont worry.. Its located on
17. There you go. So assemble your file for any location what you want to back as Desktop...
18. Feels uncomfortable on screen, any lose drivers? Restore drivers from SmartDriverBackup or any similar programs. Feels again, something missing.. Download Drivers or using DriverPackSolution for solve any missing drivers or optional nalang po ito Windows Update.. Pagtapos niyan, wala na tayo sa driver section.
19. Install Programs what do you need, need MS Office 365 or 16?, so its up to you..
20. After all these installation of softwares, Register your Product Key at Settings > Updates > Activation > Enter Product Key.. Doon mo store yung product key mo.. Need ng connection for verification, if may lumabas ng error or not so hayaan mo lang dyan.. Tapos na tayo dyan..
21. Run Ghostspectre sa Desktop for additional modifications what you need.. The Ghostspectre located on Drive
Exit tayo sa instructions..
Optional:
22. Pagrun ng game. May popup ng DirectX to install.. So accept that..
23. Pagwala kanang natira sa mga mahahalaga mo po sa Windows.old, delete it instantly.
Finish for installation and you can customize everything.
Troubleshoot:
Q: Bakit habang nagaboot sa Windows Logo walang loading screen. What means?
A: Try mo po change BIOS to UEFI or vice versa.. Basta yung partition ninyo same sila kay USB.. Or upgrade ka ng 2GB Memory.. 1GB Memory kasi yung during installation niyan, kaya biglang bumagal..
How about our personal files?
No need to move, just stay what they arranged at location... Makikita mo naman yung instructions ko, how to be know?
Kung may tanong itong idea ko?, just comment..
Features:
- Smooth OS without reformat
- Calmy experience, than ever
- Only initial less than 800MB consumed used RAM(Ghostspectre), Depende sa OS ninyo..
Requirements:
- 8 GB Flash Drive
- Windows 10 ISO file(Depende kung pinili niyo ay Superlite or Untouched)
- Rufus
- Laptop or PC
- Windows 10 Product Key
- Backup Drivers (Optional)
1. One of the requirements need to be ready or again for my instruction based.
1. Download Windows 10 ISO file galing kay Microsoft(Untouched), Ghostspectre(Lite/Superlite)
2. The flash drive must be backup all files at
C:/ Directory or any backup location, so you choose.. And maintain atleast 8GB storage for storing 5GB files to flash drive. And leave it plugged flash drive.2.1. Backup your Windows 10 Product Key(Dapat Geniune yang OS, hindi KMS) using cmd in adminstrator mode, run for this:
Spoiler contents are visible only to Established Members.
Then kunin mo yung product key, noted to your paper, phones, or capture on screenshot para sa further instructions.
2.2. Backup your all drivers using SmartDriverBackup or any similar programs.. we meet for further instructions.
3. Run Rufus at Run as Administrator, and see how to burn your copied iso to flash drive.
3.1 The Making Bootable disk must addressed at minimum 8gb flash drive.
3.2 Locate “ISO Image” instead of list of “FreeDOS” to your copied iso and load.
3.3 Target to your system for if MBR or GPT, how to be know?
Run cmd:
diskpartlist diskPaglumabas ng GPT marked to your installed OS sa disk na yan, means pipilin ninyo GPT, pag hindi pa lumabas ng GPT marked, means MBR yung section ninyo. Apply ninyo yung setting niyan para sa Partition Scheme.
3.4. Target System section naman.. Ito ay dalawa lang yan.. BIOS or EFI.. BIOS = can Detect MBR or GPT bootable disk, UEFI = can detect to EFI on GPT only.
3.5. Make sure NTFS siya, automatic siya maging NTFS so skip this step.
3.6. Click Ready.. Click yes.. (Hindi ko po kasalanan, for not recorded of backup files)
4. Waiting for serve for around 15-30 mins, Depende sa disk speed..
5. After making a bootable disk, reboot your PC into BIOS mode.
6. Alam niyo naman, kung paano magboot ng bootable disk sa BIOS. Secure boot off ganon..
7. Strike any key, if need for any key to proceed. Until Windows 10 logo appeared, paglumabas ng installation proceed to step..
8. Click install now and accept the license agreement..Theres something version if need with Windows Defender or not, so choose your plan click to next.. Choose custom install..
9. Theres any disk showed of your screen.. Maybe 1,2,3 or 4. One of the installed windows must be selected but “Don’t reformat it”.
10. Press Next, if pop up Warning selection, press Yes.. If “Next” is grayed out means iba yung partition scheme mo.. Balik ka rufus from boot to Windows 10.
11. During installation, is copied to your disk, wait for couple of minutes to finish those needcto acquire lists.
12. If installation is complete then count from 10 seconds, strike Restart now.. You can remove the Flash Drive.
13. During restart process.. And start Windows 10 in 2/3 hours, depends on performance..
14. As a appeared any instructions on screen, you can input yourself.. So its up to you.. Until we meet on Desktop.
15. On Desktop... You run user as Administrator Mode.. You can change user by making Add User on Control Panel and choose Computer Administrator, need natin para sa UAC.
16. How about our files?, Dont worry.. Its located on
C:/Windows.Old/Users/<Username>/ using File Explorer..17. There you go. So assemble your file for any location what you want to back as Desktop...
18. Feels uncomfortable on screen, any lose drivers? Restore drivers from SmartDriverBackup or any similar programs. Feels again, something missing.. Download Drivers or using DriverPackSolution for solve any missing drivers or optional nalang po ito Windows Update.. Pagtapos niyan, wala na tayo sa driver section.
19. Install Programs what do you need, need MS Office 365 or 16?, so its up to you..
20. After all these installation of softwares, Register your Product Key at Settings > Updates > Activation > Enter Product Key.. Doon mo store yung product key mo.. Need ng connection for verification, if may lumabas ng error or not so hayaan mo lang dyan.. Tapos na tayo dyan..
21. Run Ghostspectre sa Desktop for additional modifications what you need.. The Ghostspectre located on Drive
C:/GhostSpectre Folder..Exit tayo sa instructions..
Optional:
22. Pagrun ng game. May popup ng DirectX to install.. So accept that..
23. Pagwala kanang natira sa mga mahahalaga mo po sa Windows.old, delete it instantly.
Finish for installation and you can customize everything.
Troubleshoot:
Q: Bakit habang nagaboot sa Windows Logo walang loading screen. What means?
A: Try mo po change BIOS to UEFI or vice versa.. Basta yung partition ninyo same sila kay USB.. Or upgrade ka ng 2GB Memory.. 1GB Memory kasi yung during installation niyan, kaya biglang bumagal..
